18000 CMH Air Cooler
What this cooler is
The 18000 CMH air cooler is a fixed industrial evaporative air cooler, described on its product page as built for industrial-scale ventilation through natural evaporation technology. It features a triple-side air intake design and a high-capacity axial fan, which the page says ensures continuous air circulation and effectively reduces indoor temperatures even in Southeast Asia's extreme heat conditions. Its fixed structure makes it suitable for permanent installation on walls or rooftops, and the page positions it as a reliable cooling solution for warehouses, assembly lines, and livestock housing facilities. The page describes it as engineered for long-term durability, low power consumption, and minimal maintenance requirements.
Features, as described on the product page
- High-capacity cooling for large areas, as described on the page
- Low power consumption, as described on the page
- Long-term durability, as described on the page
- Minimal maintenance requirements, as described on the page
- Natural evaporation technology, as described on the page
The following are questions to confirm with the supplier, not features stated on the product page: how airflow is distributed across zones and work areas with the discharge direction and duct route you plan; which customisation options apply to the exact model you order; and what the power comparison with conventional air conditioning is for the same space, on what basis it was calculated.
Specification table — as listed
| Model | Size L x W x H (mm) | Power (kW) | Voltage / Frequency | Max airflow (m3/h) | Air outlet (mm) | Water use (L/h) | Tank (L) | Speed | Controller |
|---|---|---|---|---|---|---|---|---|---|
| DH-18AS (Top) | 1090 x 1090 x 980 | 1.1 | 380 V / 50 Hz | 18,000 | 670 x 670 | 10–15 | 25 | Single speed | Manual |
| DH-18AS/BP (Top) | 1090 x 1090 x 980 | 1.1 | 220 V / 50 Hz | 18,000 | 670 x 670 | 10–15 | 25 | Multi-speed | LCD display |
| DH-18DS (Down) | 1090 x 1090 x 980 | 1.1 | 380 V / 50 Hz | 18,000 | 670 x 670 | 10–15 | 25 | Single speed | Manual |
| DH-18DS/BP (Down) | 1090 x 1090 x 980 | 1.1 | 220 V / 50 Hz | 18,000 | 670 x 670 | 10–15 | 25 | Multi-speed | LCD display |
| DH-18BS (Side) | 1090 x 1090 x 980 | 1.1 | 380 V / 50 Hz | 18,000 | 690 x 700 | 10–15 | 25 | Single speed | Manual |
| DH-18BS/BP (Side) | 1090 x 1090 x 980 | 1.1 | 220 V / 50 Hz | 18,000 | 690 x 700 | 10–15 | 25 | Multi-speed | LCD display |
The pattern in the table is worth noticing, because it prevents an ordering mistake. All six variants share the same body size, power, airflow, water use, and tank. What changes is discharge direction, voltage, speed control, and controller type. The base models run on 380 V with manual single-speed control; the /BP models run on 220 V with multi-speed LCD control. A buyer who orders by airflow alone and ignores voltage will receive a unit that cannot be connected as planned. Confirm the voltage on site first, then the discharge direction that fits the duct route, then the control type.
Applications, as listed
- Industrial workshops: manufacturing plants, reducing high temperatures for employees and protecting equipment from overheating
- Commercial spaces: supermarkets, warehouses, large retail stores, maintaining temperature for goods storage and comfort
- Agricultural facilities: poultry farms, greenhouses, livestock barns, regulating temperature for plants and livestock
- Outdoor venues: open-air restaurants, sports arenas, event tents
What to check before you order
Confirm the water supply and drainage for the unit, the exhaust or open area that lets humidified air leave the space, and the duct route for the discharge direction you choose. An evaporative cooler without an air exit will raise humidity without cooling the space, and a cooler installed without a water plan will be a maintenance problem from the first week. Those are installation questions, and they belong in the inquiry, not in a later complaint.
Before ordering, confirm: the exact model and voltage for your site, the airflow and size you need, MOQ, lead time, and warranty. This page lists only what the source material verifies; anything not listed here is a question to ask, not a specification to assume.
Request a ventilation and cooling layout
Send your space size, heat source, and voltage, and ask for a layout using the equipment families on this page. Before payment, confirm MOQ, lead time, voltage, and warranty for your order.